Job98456
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Job98456


 
HomeSearchLatest imagesRegisterLog in

 

 BSNL DataOne Internet on Linux

Go down 
AuthorMessage
naveen98456




Number of posts : 1264
Age : 49
Registration date : 2008-03-08

BSNL DataOne Internet on Linux Empty
PostSubject: BSNL DataOne Internet on Linux   BSNL DataOne Internet on Linux EmptyWed 26 Mar - 14:24

The BSNL guys came and installed a Huawei SmartAX MT880 ADSL router
today. As my place is about 4 KM away from the telephone exchange,
I will not be getting the full 256Kbps promised by the telecom
department (it seems ADSL has a distance limit of about 3.5Km for
good quality).

The telecom department still seems to be not very conversant with
Linux - but the people who came to do the installation were very
helpful and friendly. I was given the phone number of a person who
was using the router with Linux in case I had trouble setting it up -
but that was not required as the configuration was very simple.

Here are the things to do to get DataOne working on Linux:

Plug in a LAN card and make sure that the required driver
is present in the kernel, either compiled-in or loaded as a module.
Connect the router to the ethernet card.
Assign an IP address for the ethernet card; the router has a
fixed interface address of 192.168.1.1, so you can use 192.9.168.2
for your ethernet interface. Just do `ifconfig eth0 192.168.1.2′.
Set up the route - just do `route add default gw 192.168.1.1′.
Enter the address of some DNS servers in /etc/resolv.conf (
eg: 61.1.96.69, 61.1.96.71)
Try doing a `ping www.google.co.in’. If it works, great! If
not, check whether it is some problem with the DNS settings by
pinging a machine with the I/P address rather than the name. If
that too doesn’t work, you will have to do some configuration on
the router.
You can access the router via a browser - just enter the
I/P address 192.168.1.1. You basically have to set the connection
type to `PPPoE’; on my MT880 box, this comes under `WAN Settings’.
You will then have to enter your user name and password (username is
of the form xyz@dataone) and reset the router. It will take 2-3
minutes for the box to come up again - when it comes up, it will
`automagically’ talk with the box at the exchange (via PPP?) and
will be assigned a proper IP address. You need not bother about this
address as you always see the router at a fixed address of 192.168.1.1.
Try pinging google.com again - it should work! You are now on
DataOne!
I am getting connection speeds of about 190Kbps consistently; that
should be OK, given the distance. Some of my students who are staying
near the telephone exchange report that they are even getting speeds
greater than the promised 256Kbps!
Back to top Go down
 
BSNL DataOne Internet on Linux
Back to top 
Page 1 of 1
 Similar topics
-
» Broadband Internet BSNL with Linux Ubuntu - Installing in Uttar Pradesh
» BSNL DataOne Broadband Internet Connection and Ubuntu Linux in Kanpur Lucknow Patna Jhansi Gorakhpur Varanasi
» How To Setup BSNL DataOne Broadband on Linux / Fedora Core
» How To Setup BSNL Dataone broadband on Linux / Fedora Core
» BSNL DataOne Broadband Connection and Linux Ubuntu in Uttar Pradesh

Permissions in this forum:You cannot reply to topics in this forum
Job98456 :: BSNL Broadband-
Jump to: